News

Position: Home > News

BACK

Track light size Precautions for track light installation

Source: PengKe Lighting

Time: 2019-12-03

  The track contains the voltage input inside the track, and there are conductive metal strips on both sides of the track. The joint of the track lamp has a rotatable conductive copper sheet. During the installation, the conductive copper sheet on the track light contacts the track The conductive metal strip can be used to energize the track light, and the track light can be turned on. Next, Pengke Lighting introduces the size of the track lights and the precautions for the installation of the track lights.


 
  Track light size:
  1, 3W surface mounted track light
  The diameter of the base is generally 5.2cm, the height is generally 16cm, the length of the lamp is 10cm, and the mounting box is about 10.3cm in length.
  2, 7W surface mounted track light
  The diameter of the base is generally 7.1cm, the height is generally 17cm, the length of the lamp is 11cm, and the mounting box is about 9.7cm in length.
  3, 12W surface mounted track light
  The diameter of the base is generally 9.9cm, the height is generally 26cm, the length of the lamp is 18cm, and the mounting box is about 9.7cm in length.
  4, 18W surface mounted track light
  The diameter of the base is generally 11.4cm, the height is generally 27cm, the length of the lamp is 17.7cm, and the mounting box is about 9.7cm in length.

  Precautions for track light installation:
  During the installation of track lights, you should avoid touching the surface of the lights with your hands. Also, avoid installing them in places with heat sources and corrosive gases. If these are installed, the service life of the track lights will be affected. Also, during installation, the place should be inspected without vibration or swing, and of course there should be no hidden danger of fire.
  When using track lights, try not to switch them frequently, because at the moment when the lamp is frequently started, the current through the filament is greater than the current during normal operation. The rapid rise in temperature of the filament greatly accelerates sublimation, thereby reducing its service life.

  In short: I have introduced here about the size of the track lights and the precautions for the installation of the track lights. I hope it will be helpful to everyone. Want to know more about lighting information, you can pay attention to friends carved information.
Service Hotline
0760-88758858
  • Scan and follow us

    Scan and follow us

CONTACT TEL TOP NAV